- Baum Ball-Steel 5/8"
- Baum Belt-Gear 1422V460
- Baum Caliper Draw Roll Band
- Baum Caliper Draw Roll Band
- Baum Feed Tire
- Baum Feed Tire
- Baum Scoring Rubber, 7/8" S/S
- Baum Scoring Rubber, 7/8" S/S
- Baumfolder .062 Thick Countersunk Bevel Side with 7/8" Shaft
- Baumfolder #1Score with 1-1/8" Shaft
- Baumfolder #2Score with 1-1/8" Shaft
- Baumfolder Assy-Blade Holder with 7/8" Shaft
- Baumfolder Clamp
- Baumfolder Clamp
- Baumfolder Collar-Blade Holder with 7/8" Shaft
- Baumfolder Collar-Blade Holder with 7/8" Shaft
- Baumfolder Collar-Female Perf with 7/8" Shaft
- Baumfolder Collar-Female Perf with 7/8" Shaft
- Baumfolder Gear-Helical 13T RH Roll for Liberty Searies
- Baumfolder Head-Scoring Lower with 7/8 shaft
- Baumfolder Hollow Ground Countersunk Bevel Side with 7/8" Shaft
- Baumfolder Hollow Ground Countersunk Flat Side with 7/8" Shaft
- Baumfolder Hub-Blade Holder (Special) with 1-1/8" Shaft
- Baumfolder Light Score .060 with 7/8" Shaft
- Baumfolder Light Score .060 with 7/8" Shaft
- Baumfolder Register Tape, Cloth 1" x 61"
- Baumfolder Screw-Filsr 10-24x3/8
- Baumfolder Screw-Set Brass Tip
- Baumfolder Split Score with 1-1/8" Shaft
- Baumfolder Split Slitter with 7/8" Shaft
- Baumfolder Stripper-Outside RH - Assy # 15627
- Baumfolder Stripper-Outside RH - Assy # 15627
- Baumfolder Stripper-Outside RH - Assy # 16721
- Baumfolder Stripper-Slotted (714) - Assy # 45297
- Baumfolder With Key Way (replaced by 93209) with 1-1/8" Shaft
- Baumfolder With Three Countersunk Holes with 1-1/8" Shaft
- Cornerounder® Special Cutting Unit 1/16"
- Cornerounder® Special Cutting Unit 3/16"
- Cornerounder® Special Cutting Unit 3/32"
- Cornerounder® Special Cutting Unit 5/16"
- Cornerounder® Special Cutting Unit 5/32"
- Cornerounder® Special Cutting Unit 5/8"
- Cornerounder® Standard Cutting Unit
- Cornerounder® Standard Cutting Unit
- Cornerounder® Standard Cutting Unit 1/2"
- Cornerounder® Standard Cutting Unit 3/8"
- Cornerounder® Table Assemblies For Model CR-60 1/2"
- Cornerounder® Table Assemblies For Model CR-60 3/4"
- Cornerounder® Table Assemblies For Model CR-60 for 1"
- Cornerounder® Table Assemblies For Model CR-60 for 1-1/2"
- Premium PTFE No Liner (Can-Do)
- Premium PTFE No Liner (Can-Do)
- Premium PTFE No Liner (Can-Do)
- #0656 (MBM) 6550 42289 29.724 x 3.543 x .394 5H M10
- .060 x .024 Galvanized Hi-Bar Box Stitching 10 lb spool Wire (50 lbs. Case)
- .103 x .020 Copper Box Stitching 10lb spool Wire (50 lbs. Case)
- .103 x .020 Copper Box Stitching 25lb spool Wire (50 lbs. Case)
- .103 x .023 Copper Box Stitching 10lb spool Wire (50 lbs. Case)
- .103 x .023 Copper Box Stitching 25lb spool Wire (50 lbs. Case)
- .103 x .028 Copper Box Stitching 10lb spool Wire (50 lbs. Case)
- .103 x .028 Copper Box Stitching 25lb spool Wire (50 lbs. Case)
- .495 x .495 x 19.375
- 1- 3/16" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE
- 1/2 x 2" Challenge standard duralon
- 1/2 x 2" Challenge standard teflon coated
- 1/2 x 2" Challenge standard titanium #35
- 1/2 x 2" Challenge standard uncoated
- 1/2 x 2.50" Challenge long duralon
- 1/2 x 2.50" Challenge long teflon coated
- 1/2 x 2.50" Challenge long titanium #35
- 1/2 x 2.50" Challenge long uncoated
- 1/2" Pioneer Teflon Paper Drill
- 1/2" Spinnit Teflon Coated Paper Drill
- 1/2" Spinnit Uncoated Paper Drill
- 1/2" x 2 1/4" Lawson® standard duralon
- 1/2" x 2 1/4" Lawson® standard teflon
- 1/2" x 2 1/4" Lawson® standard titanium
- 1/2" x 2 1/4" Lawson® standard uncoated
- 1/2" x 2 1/4" Nygren-Dahly standard duralon
- 1/2" x 2 1/4" Nygren-Dahly standard teflon
- 1/2" x 2 1/4" Nygren-Dahly standard titanium
- 1/2" x 2 1/4" Nygren-Dahly standard uncoated
- 1/2" x 3" Lawson® long duralon
- 1/2" x 3" Lawson® long teflon
- 1/2" x 3" Lawson® long titanium
- 1/2" x 3" Lawson® long uncoated
- 1/2" x 3.0 IRAM Teflon Long
- 1/2" x 3.0 IRAM Uncoated Long
- 1/2” Pioneer Uncoated Paper Drill
- 1/4 x 2" Challenge standard teflon coated
- 1/4 x 2" Challenge standard titanium #35
- 1/4 x 2" Challenge standard uncoated
- 1/4 x 2.50" Challenge long duralon
- 1/4 x 2.50" Challenge long teflon coated
- 1/4 x 2.50" Challenge long titanium #35
- 1/4 x 2.50" Challenge long uncoated
- 1/4 x 24mm x 52mm Lihit Style (short) (Teflon)
- 1/4 x 24mm x 52mm Lihit Style Uncoated(short)
- 1/4 x 50mm x 80mm Lihit Style Uncoated (long)
- 1/4 x 50mm x 80mm Lihit Style Uncoated (long) Teflon
- 1/4" Pioneer Teflon Paper Drill
- 1/4" Pioneer Uncoated Paper Drill
- 1/4" Spinnit Teflon Coated Paper Drill
- 1/4" Spinnit Uncoated Paper Drill
- 1/4" x 2 1/4" Lawson® standard duralon
- 1/4" x 2 1/4" Lawson® standard teflon
- 1/4" x 2 1/4" Lawson® standard titanium
- 1/4" x 2 1/4" Lawson® standard uncoated
- 1/4" x 2 1/4" Nygren-Dahly standard duralon
- 1/4" x 2 1/4" Nygren-Dahly standard teflon
- 1/4" x 2 1/4" Nygren-Dahly standard titanium
- 1/4" x 2 1/4" Nygren-Dahly standard uncoated
- 1/4" x 2 1/4" Seybold Standard Uncoated Paper Drill
- 1/4" x 2.0 IRAM Standard Teflon
- 1/4" x 2.0 IRAM Uncoated Standard
- 1/4" x 3" Lawson® long titanium
- 1/4" x 3" Lawson® long duralon
- 1/4" x 3" Lawson® long teflon
- 1/4" x 3" Lawson® long uncoated
- 1/4" x 3.0 IRAM Teflon Long
- 1/4” x 3.00 IRAM Uncoated Long
- 1/8 mm x 30mm x 82mm Lihit Style Drill (Long)
- 1/8 mm x 30mm x 82mm Lihit Style Drill (Long) Teflon
- 1/8 x 1" Challenge standard duralon
- 1/8 x 1" Challenge standard teflon coated
- 1/8 x 1" Challenge standard titanium #35
- 1/8 x 1" Challenge standard uncoated
- 1/8 x 24mm x 52mm Lihit Style Drill (short)
- 1/8 x 24mm x 52mm Lihit Style Drill (short) Teflon
- 1/8" Pioneer Uncoated Paper Drill
- 1/8" Spinnit Teflon Coated Paper Drill
- 1/8" Spinnit Uncoated Paper Drill
- 1/8" x 1 3/8" Lawson® standard Teflon
- 1/8" x 1" Lawson® standard duralon
- 1/8" x 1" Lawson® standard titanium
- 1/8" x 1" Lawson® standard uncoated
- 1/8" x 1" Nygren-Dahly standard duralon
- 1/8" x 1" Nygren-Dahly standard teflon
- 1/8" x 1" Nygren-Dahly standard titanium
- 1/8" x 1" Nygren-Dahly standard uncoated
- 1/8" x 1" Seybold Standard Uncoated Paper Drill
- 1/8" x 1.0 IRAM Uncoated Standard
- 1/8" x 2.0 IRAM Standard Teflon
- 1/8” Pioneer Teflon Paper Drill
- 1-1/2" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE
- 1-1/2" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE with SPECIAL TEFLON COATING
- 11/32 x 2" Challenge standard duralon
- 11/32 x 2" Challenge standard teflon coated
- 11/32 x 2" Challenge standard uncoated
- 11/32" x 2 1/4" Lawson® standard duralon
- 11/32" x 2 1/4" Lawson® standard teflon
- 11/32" x 2 1/4" Lawson® standard titanium
- 11/32" x 2 1/4" Lawson® standard uncoated
- 11/32" x 2 1/4" Nygren-Dahly standard uncoated
- 11/32" x 2 1/4" Seybold Standard Uncoated Paper Drill
- 1-1/4" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE
- 1-1/4" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE with SPECIAL TEFLON COATING
- 115 Quick Change 54.000 x 5.000 x .498 30H M10
- 12 INCH MANUAL BANDING PRESS
- 13" 13-107 14.000 x 2.500 x .250 4H 3/8"-16
- 1-3/16" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE with SPECIAL TEFLON COATING
- 13/32 x 2" Challenge standard duralon
- 13/32 x 2" Challenge standard teflon coated
- 13/32 x 2" Challenge standard uncoated
- 13/32" Spinnit Teflon Coated Paper Drill
- 13/32" x 2 1/4" Lawson® standard duralon
- 13/32" x 2 1/4" Lawson® standard teflon
- 13/32" x 2 1/4" Lawson® standard titanium
- 13/32" x 2 1/4" Lawson® standard uncoated
- 13/32" x 2 1/4" Nygren-Dahly standard teflon
- 13/32" x 2 1/4" Seybold Standard Uncoated Paper Drill
- 1-3/8" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE
- 1-3/8" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE with SPECIAL TEFLON COATING PROCESS
- 15/64" x 2 1/4" Lawson® standard duralon
- 15/64" x 2 1/4" Lawson® standard teflon
- 15/64" x 2 1/4" Lawson® standard titanium
- 15/64" x 2 1/4" Lawson® standard uncoated
- 15/64" x 3" Lawson® long duralon
- 15/64" x 3" Lawson® long teflon
- 15/64" x 3" Lawson® long titanium
- 15/64" x 3" Lawson® Long uncoated
- 1-5/8" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE
- 1-5/8" Diameter HEAVY-DUTY PAINT CAN DRILL BIT for CHALLENGE with SPECIAL TEFLON COATING
- 155 #5023 20.750 x 2.560 x .250 8H 1/4"-20
- 16" Advance 162 #210020.500 x 3.500 x .3758H 3/8"-16
- 18 1/2" Cut 22.480 x 2.755 x .234 5H M10
- 18D Stitcher Head
- 18D Style Bender Bar 1/2 (all wire sizes)
- 18D Style Bender Bar 5/8 20 Wire
- 18D Style Bender Bar 5/8 25 Wire
- 18D Style Bonnet Clamp Block
- 18D Style Clincher Plate
- 18D Style Clincher Plate - solid
- 18D Style Clincher Plate Assy. (Inc. clincher points)
- 18D Style Clincher Point Flat
- 18D Style Clincher Point Rd.
- 18D Style Clincher Slide
- 18D Style Clincher Slide Adj. Block
- 18D Style Clincher Slide Adj. Screw
- 18D Style Clincher Slide Block Clamp
- 18D Style Driver 1/2
- 18D Style Driver 1/2
- 18D Style Driver 5/8 20 Wire
- 18D Style Driver 5/8 20x24 Wire
- 18D Style Driver 5/8 23 Wire
- 18D Style Driver 5/8 25 Wire
- 18D Style Driver Bar Assembly
- 18D Style Face Plate 1/2
- 18D Style Face Plate 5/8
- 18D Style Grip (round)
- 18D Style Grip (round)
- 18D Style Grip (square)
- 18D Style Grip Block
- 18D Style Grip Holder
- 18D Style Grip Release Slide
- 18D Style Grip Ret. Spring
- 18D Style Grip Spring
- 18D Style Sliding Wire Cutter
- 18D Style Sliding Wire Cutter
- 18D Style Stationary Knife 1/2 20-24 Wire
- 18D Style Stationary Knife 1/2 20-24 Wire
- 18D Style Stationary Knife 1/2 25-30 Wire
- 18D Style Stationary Knife 1/2 25-30 Wire
- 18D Style Stationary Knife 5/8 20-24 Wire
- 18D Style Stationary Knife 5/8 20-24 Wire
- 18D Style Stationary Knife 5/8 25-30 Wire
- 18D Style Stationary Knife 5/8 25-30 Wire
- 18D Style Supporter 5/8
- 18D Style Supporter Guide Plate
- 18D Style Supporter Pivot Pin
- 18D Style Supporter Spring Heavy
- 18D Style Supporter Spring Light
- 18D Style Swivel 1/2
- 18D Style Swivel 5/8
- 18D Style Swivel Hook
- 18D Style Swivel Hook Pin
- 18D Style Swivel Hook Spring
- 18D Style Swivel Op. Lever
- 18D Style Swivel Op. Lever Hub
- 18D Style Swivel Op. Lever Pin
- 18D Style Swivel Op. Lever Stud
- 18D Style Swivel Op. Spring
- 18D Style Tension Roll Spr. Rod Ret. Scr.
- 18D Style Tension Roll Spring
- 18D Style Tension Roll Spring Rod
- 18D Style W/C Op. Slide Assembly
- 18D Style W/C Op. Slide Assembly
- 18D Style W/C Slide Catch Screw
- 18D Style Wire Straightener Roll
- 19" 1927 A Design 1 23.000 x 3.250 x .375 4H 3/8"-16